Stellar 100 is ResMed's premium non invasive ventilator  (with invasive capabilities) for patients with changing ventilatory needs or progressive respiratory conditions, including chronic obstructive pulmonary disease (COPD), neuromuscular disease (NMD) and obesity hypoventilation syndrome (OHS). Easy to set up and use, Stellar 100  carefully strikes a balance between providing clinicians with pre programmed settings that make their job easier, and the opportunity to fine-tune settings when needed to suit each individual patient - a versatile system with its end user in mind

Key Features - 

• Height - 120 mm
• Weight - 2.1 kg
• Breadth - 170 mm
• Length - 230 mm
• Sound pressure level - < 30 dB(A)
• Storage and transport temperature/humidity -
• Maximum single fault steady pressure - 60 cm H2O
• Electromagnetic compatibility - Product complies with all applicable electromagnetic compatibility requirements (EMC) according to IEC60601-1-2, for residential, commercial, and light industry environments.
• Aircraft use - Product complies with RTCA/DO-160 section 21 requirements. Consult the medical services department of your carrier if you intend to use your device on an aircraft. Note: You should not use the Stellar 100 while the aircraft is taking off or landing
• Max Flow - > 200 L/min at 20 cm H2O
• Tubing - Flexible plastic, 6’ 6” (2 m) or 9’ 10” (3 m) length (0.9”/22 mm diameter) / SlimLine air tubing Flexible plastic, 6” (1.83 m) length (0.6”/15 mm diameter)
• Air outlet - 0.9”(22 mm) taper, compatible with ISO 5356-1:2004 Anaesthetic & Respiratory Equipment - Conical Connectors
• Operating pressure range - IPAP: 3 cm H2O to 40 cm H2O • EPAP: 3 cm H2O to 25 cm H2O • CPAP: 4 cm H2O to 20 cm H2O
• Standard air filter - Electro static fibre mesh with TPE frame structure
• Operating temperature/ humidity/altitude - +32°F (0°C) to + 95°F (35°C) / 10%–95% non-condensing /
• Modes - CPAP, S, ST, T, PAC
• IEC 60601-1 - Class II (double insulation), type BF, continuous operation
• Internal Battery - Lithium-Ion battery, 14.4 V, 1.6 Ah, 23 Wh Battery run-time: 2 hours (measured at IPAP15 cm H2O, EPAP 5 cm H2O, nasal mask, 6’ 6” (2 m) air tubing, no leak, 20 bpm)
• Power supply unit - AC 100–240V, 50–60Hz, 2.2 A, max. 65 W
• Housing construction - Flame retardant engineering thermoplastic
• Breathing resistance under single fault - 2 cm H2O at 30 L/min; 7.2 cm H2O at 60 L/min null
• Mask pressure tolerance - IPAP: ± 0.5 cm H2O ± 10% of set pressure (end of inspiration) EPAP/PEEP: ± 0.5 cm H2O ± 4% of set pressure CPAP: ± 0.5 cm H2O ± 10% of set pressure null
• Mask flow tolerance - ± 6 L/min or 20%, whichever is greater null
• Pressure measurement - Internally mounted pressure transducer null
• Flow measurement - Internally mounted flow transducer null
• External DC Power Supply - 24 V, 3 A null

Send Enquiry to Manufacturer

Full Name

Email Address

Phone Number

Query