Lumis 150 ST is a non invasive ventilator designed for non dependent patients with respiratory insufficiency. Featuring ResMed's unique volume assurance mode - iVAPS (intelligent Volume Assured Pressure Support) - Lumis 150 VPAP ST maintains target alveolar ventilation to suit each patient's changing needs. Optional AutoEPAP ensures adequate EPAP is delivered to maintain an open upper airway - automatically, while an intelligent Backup Rate (iBR) encourages spontaneous breathing. Lumis 150 ST is also easy to set up and use.

Key Features - 

• Height - 150 mm
• Weight - 1268 gm
• Breadth - 255 mm
• Length - 116 mm
• Sound pressure level - 27 dBA with uncertainty of 2 dBA
• Standard air filter - Material: Polyester non woven fibre Average arrestance: >75% for ~7 micron dust
• Aircraft use - ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel.
• Modes - CPAP, S, T, ST with optional iBR, PAC, iVAPS with iBR and optional Auto EPAP
• Water capacity - To maximum fill line 380 mL null
• Sensors - Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min null
• Maximum single fault steady pressure - Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec. null
• Housing construction - Flame retardant engineering thermoplastic null
• Cleanable humidifier - material: Injection moulded plastic, stainless steel and silicone seal null
• Operating pressure range - S, ST, T, PAC, iVAPS: 2 to 25 cm H2O (2 to 25 hPa) CPAP 4 to 20 cm H2O (4 to 20 hPa) null
• Operating temperature/ humidity/altitude - +5°C to +35°C / 10 to 95% relative humidity, non-condensing / Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa null
• Storage and transport temperature/humidity - -20°C to +60°C / 5 to 95% relative humidity, non-condensing null
• Supplemental oxygen - Maximum flow: 15 L/min (S, ST, T, PAC, CPAP), 4 L/min (iVAPS) null
• Air outlet - (complies with ISO 5356-1:2004): 22 mm null
• Electromagnetic compatibility - requirements (EMC) according to IEC 60601-1-2:2014, for residential, commercial and light industry environments. It is recommended that mobile communication devices are kept at least 1 m away from the device. null
• IEC 60601-1:2005+A1:2012 classification - Class II (double insulation), Type BF, Ingress protection IP22 null

Send Enquiry to Manufacturer

Full Name

Email Address

Phone Number

Query